• 1: Home
• 2: About Us
• 3: Products
  • 3.1: Cedar Products
    • 3.1.1: Western Red Cedar Timbers
  • 3.2: Kiln Dried 4x4
  • 3.3: Log Home Products
    • 3.3.1: Milled D Logs
    • 3.3.2: Lathe Turned Logs
    • 3.3.3: Wood Dowel
  • 3.4: Poles/Pilings
  • 3.5: Railroad Products
    • 3.5.1: Wood Railroad Ties
    • 3.5.2: Railway Bridge Material
  • 3.6: Agricultural Products
    • 3.6.1: Grape Stakes
    • 3.6.2: Hop Poles
    • 3.6.3: Tree Stakes
  • 3.7: Timbers
    • 3.7.1: Exposed Beams
  • 3.8: Woodguard™
    • 3.8.1: Woodguard™ Fencing
    • 3.8.2: Woodguard AG™ Organic
• 4: Meet Our Staff
  • 4.1: Lakewood Office
    • 4.1.1: Joe Nealon
    • 4.1.2: Dave Betz
    • 4.1.3: Dan Spriesterbach
    • 4.1.4: Bill McGovern
    • 4.1.5: Mike Betz
  • 4.2: Portland Office
    • 4.2.1: Pat Murphy
    • 4.2.2: Chris Sallee
    • 4.2.3: Steven Wearne
    • 4.2.4: Brian Dieringer
    • 4.2.5: Brian Baker
  • 4.3: Administrative Staff
    • 4.3.1: Tracy Hallock
    • 4.3.2: Linda Haeckel
    • 4.3.3: Ladena Larson
    • 4.3.4: Martha Kellcy
• 5: Contact Us

Milled D Logs

At Pacific Western Lumber, all of our raw material for milled D-logs is derived from “winter cut” Engelmann Spruce and Lodgepole Pine. They are stickered horizontally and vertically, paper-capped, and air dried for a minimum of 120 days. This allows us to gently reduce the moisture content to approximately 19%.
After proper seasoning, the cants are run through a sixteen knife planer to our standard double tongue & groove milled D-log pattern. Our 6x8 and 8x8 D-log’s have a 7 ¼” stack height with a drip edge.
In addition to our standard milled D-log, we can also run round/round, flat/flat, and Appalachian style patterns.